21,524 research outputs found
Apollo 15 mission report. Supplement 3: Ascent propulsion system final flight evaluation
Results from the postflight analysis of the ascent propulsion system (APS) performance during the Apollo 15 mission are presented. The duty cycle for the LM-10 APS consisted of two firings, and ascent stage liftoff from the lunar surface and the terminal phase ignition (TPI) burn. An evaluation was made of APS performance for the first firing and found to be satisfactory. No propulsion data was received from the second APS burn; however, all indications were that the burn was nominal. All performance parameters were well within their LM-10 3-sigma limits. Calculated throat erosion at engine cutoff for the LM-10 APS was approximately 3 percent greater than predicted
Polaroid film helps locate objects in inaccessible areas quickly
Polaroid film is used with conventional portable X ray equipment to locate and shoot items or objects in difficult areas. Polaroid film development time is about 20 seconds
Development of an advanced composite aileron for the L-1011 transport aircraft
Significant improvements in structural efficiency can be achieved by the utilization of advanced composites for construction of aircraft secondary structures. Careful evaluation of alternate designs and materials for the L-1011 advanced composite inboard aileron has led to the selection of several unique material combinations and easily manufactured structural configurations. The advanced composite aileron is a direct replacement for the metal aileron with a weight savings of 23 percent. Due to the configurational simplicity of the components within the composite aileron, and because it contains 50 percent fewer parts and fasteners than the metal aileron, it is predicted that the composite aileron will be cost competitive with the metal aileron in a production environment. Structural analysis of the composite aileron, in conjunction with the design data, concept verification, and ground tests, indicates that the composite aileron design meets or exceeds structural requirements
Influence of facemask design on operational performance
Spirometric measurements of oxygen volume and determination of the amount of argon in exhaled breath are used to analyze facemask design efficiency during treadmill walking tests with subjects carrying plastic hoods filled with argon. Facemask leakage measurements established the better performance of a pneumatic seal type mask in comparison with plain seal type masks
Effect on smoking quit rate of telling patients their lung age: the Step2quit randomised controlled trial
Objective To evaluate the impact of telling patients their estimated spirometric lung age as an incentive to quit smoking.Design Randomised controlled trial.Setting Five general practices in Hertfordshire, England.Participants 561 current smokers aged over 35.Intervention All participants were offered spirometric assessment of lung function. Participants in intervention group received their results in terms of "lung age" (the age of the average healthy individual who would perform similar to them on spirometry). Those in the control group received a raw figure for forced expiratory volume at one second (FEV1). Both groups were advised to quit and offered referral to local NHS smoking cessation services.Main outcome measures The primary outcome measure was verified cessation of smoking by salivary cotinine testing 12 months after recruitment. Secondary outcomes were reported changes in daily consumption of cigarettes and identification of new diagnoses of chronic obstructive lung disease.Results Follow-up was 89%. Independently verified quit rates at 12 months in the intervention and control groups, respectively, were 13.6% and 6.4% (difference 7.2%, P=0.005, 95% confidence interval 2.2% to 12.1%; number needed to treat 14). People with worse spirometric lung age were no more likely to have quit than those with normal lung age in either group. Cost per successful quitter was estimated at 280 pound ((euro) 365, $556). A new diagnosis of obstructive lung disease was made in 17% in the intervention group and 14% in the control group; a total of 16% (89/561) of participants.Conclusion Telling smokers their lung age significantly improves the likelihood of them quitting smoking, but the mechanism by which this intervention achieves its effect is unclear.Trial registration National Research Register N0096173751
Experimental evaluation of outer case blowing or bleeding of single stage axial flow compressor. Part I - Design of rotor and bleeding and blowing configurations
Rotor design to evaluate outer case blowing or bleeding of single stage axial flow compresso
Recent trends in the incidence of anxiety diagnoses and symptoms in primary care.
Anxiety is common, with significant morbidity, but little is known about presentations and recording of anxiety diagnoses and symptoms in primary care. This study aimed to determine trends in incidence and socio-demographic variation in General Practitioner (GP) recorded diagnoses of anxiety, mixed anxiety/depression, panic and anxiety symptoms
Do Childhood Vaccines Have Non-Specific Effects on Mortality
A recent article by Kristensen et al. suggested that measles vaccine and bacille CalmetteāGuĆ©rin (BCG) vaccine might\ud
reduce mortality beyond what is expected simply from protection against measles and tuberculosis. Previous reviews of the potential effects of childhood vaccines on mortality have not considered methodological features of reviewed studies. Methodological considerations play an especially important role in observational assessments, in which selection factors for vaccination may be difficult to ascertain. We reviewed 782 English language articles on vaccines and childhood mortality and found only a few whose design met the criteria for methodological rigor. The data reviewed suggest that measles vaccine delivers its promised reduction in mortality, but there is insufficient evidence to suggest a mortality benefit above that caused by its effect on measles disease and its sequelae. Our review of the available data in the literature reinforces how difficult answering these considerations has been and how important study design will be in determining the effect of specific vaccines on all-cause mortality.\u
Advanced composite aileron for L-1011 transport aircraft: Design and analysis
Detail design of the composite aileron has been completed. The aileron design is a multi-rib configuration with single piece upper and lower covers mechanically fastened to the substructure. Covers, front, spar and ribs are fabricated with graphite/epoxy tape or fabric composite material. The design has a weight savings of 23 percent compared to the aluminum aileron. The composite aileron has 50 percent fewer fasteners and parts than the metal aileron and is predicted to be cost competitive. Structural integrity of the composite aileron was verified by structural analysis and an extensive test program. Static, failsafe, and vibration analyses have been conducted on the composite aileron using finite element models and specialized computer programs for composite material laminates. The fundamental behavior of the composite materials used in the aileron was determined by coupon tests for a variety of environmental conditions. Critical details of the design were interrogated by static and fatigue tests on full-scale subcomponents and subassemblies of the aileron
- ā¦